Products

DESCRIPTION

Overview

Basic Info.

Model NO.	1-2500m3
Usage	Environmental Protection, Industral, Chemical
Product Categories	FRP Tank
Molding Method	Filament Winding
Material	FRP
Fiber Type	E-Glass Fiber
Type	Polyester FRP
Model	Vertical Tank
Shape	Round Tank
Product Name	FRP Chemical Tank
Transport Package	Steel Frame, Wood Saddle
Specification	DN600~DN25000mm
Trademark	JIUBO
Origin	China
HS Code	392510000
Production Capacity	10000sets

Packaging & Delivery

Package Size 1200.00cm * 120.00cm * 120.00cm Package Gross Weight 120.000kg

Product Description

Product Description

FRP tank is made with fiberglass and resin with filament winding process, it's characteristics are:

1. Light weight, its density is 1.5-1.9, equals one forth of the steel, but its strength is higher.
2. Corrosion resistant, we can select different kind of resin against the variety of the media, such as acid, alkaline, salt and oil etc.
3. The inner surface is very smooth, the roughness coefficient is 0.0084, it is easier to clean, and has good sanitary property.
4. Good property against low temperature, it can be used under the condition of -80ºC.
5. Good thermal insulation property, its thermal expansion factor is 2*10-5/ºC, the thermal conductivity is 0.2 Kcal.m/m2.h. ºC.
6. The formation is easy, maintenance is convenient and it is suitable for the comprehensive equipment, the diameter is more than 4000mm can be fabricated on jobsite.

It's volume is 1m3-5000m3, and already be widely used for Chemical, Petrochemical, dyeing, pharmaceutical, metallurgy, brewing, water treatment, chlor-alkali, etc many different industries.

GRP tank is composed of inner layer, the structural layer and outer layer. The Inner layer is included resin rich layer and middle layer

1 Resin rich layer

It is corrosion-resistant layer composed by resin coat and surface mat. The content of resin is more than 90%, and the thickness is not less 1.7mm.

2 Middle layer

It adopts E-chopped fiberglass and inner liner resin. The content of resin is from 65% to 75% and the thickness is not less 3.3mm. This layer can efficiently prevent the extension of fine cracks on inner surface. So it plays a role of double protection.

3 Structural layer

This layer reinforces the inner surface and leakage proof layer, resisting the out load of the tower and guarantee rigidity and strength of the pipe. It adopts the combination of E-glass woven fabric, helical winding and hoop winding. The adopted resin is structural type and the content is from 55% to 65%. The thickness depends on the calculation of the specific condition. At the production of this layer, our company adopt cross winding process, so it can avoid the occurrence of hoop cracks efficiently.

4 Outer surface layer

It is ageing resistant layer. The resin adopted includes ultraviolet absorbent and paraffin, so it can efficiently prevent the tower from ageing under the ultraviolet radiation outdoors. The thickness is 1.5mm, the content of resin should be more than 90%.It is ageing resistant layer. The resin adopted includes ultraviolet absorbent and paraffin, so it can efficiently prevent the tower from ageing under the ultraviolet radiation outdoors. The thickness is 1.5mm, the content of resin should be more than 90%.

Detailed PhotosProduct Parameters

Dimension table of FRP vertical tank with flat bottom
Vol. (m3)/Dia. (mm)	DN1600	DN1800	DN2000	DN2200	DN2600	DN3000	DN4000
10	5140	4090	3370
20		8030	6550	5460	4000
30				8100	5890	4550
50					9650	7390	4340
80						11630	6740
100							8340
150							12340

Packaging & ShippingFAQ

Q: Can you choose correct raw material for our FRP product?
A: absolutely, pls provide medium & concentration, temperature, pressure etc technical parameters, PP/FRP, PVC/FRP, PVDF/FRP etc pipe/tank/tower also are in our supply scope.